4
1-3. Safety Notes
In order to ensure that your SNIPE works properly you must ensure that it is correctly used and connected
follow the Operating Instructions in this manual.
When it is correctly installed, the antenna automatically assumes the rest position when the ignition is
switched on and locks itself there. If the system cannot fully retract or cannot retract at all due to a fault,
then it is your responsibility to check that the antenna is safely and properly stowed.
Please note also that dierent legal requirements apply to the operation of electrical and electronic
equipment in dierent countries. As the user of this equipment, you yourself are responsible for ensuring
compliance with the relevant laws and regulations.
The manufacturer accepts no liability for direct or indirect damage or for consequential damage to the
system itself, motor vehicles or other equipment or goods resulting from the connection of unsuitable
battery systems or installation/wiring errors.
To Next Page
Loading...
