To Next Page

To Previous Page

There are a number of common issues that can aect the signal reception quality or the

operation of the SNIPE. The following sections address these issues and potential

solutions.

5. Trouble shooting

Connection between the power and controller

Connection between the controller and the antenna. Make sure that the left port of the antenna

should be connected to the controller.

Check if the cigarette lighter adaptor or adaptor has been damaged.ii.

A. No function when you power on the Controller

Check again all the cable connections have been made correctly.

C. Mechanical problems

Try to power OFF/ON again.

If the antenna does not move into desired position.

ii.

Try to power OFF/ON again. If problem persists, please contact your local distributor for assistance.

If the antenna makes a noise whilst remaining static.

B. Fail to search the selected satellite

Satellite signals can be blocked or degraded by buildings, trees.

Make sure there are no obstructions in a southward direction.

D. Other issues

If the system has been improperly wired, it will not operate properly. Contact your local

distributor for assistance of cable damage.

ii. Check your program of Controller often, and get the latest updates for your SNIPE

SELFSAT Snipe User Manual

Questions and Answers: