508.366.1488 | www.semshred.com
Disclaimers
Every care has been taken by the staff of SEM in compilation of the data contained in all training and informational
materials (“collateral”) and in verification of its accuracy when published; however, the content of this collateral is
subject to change without notice due to factors outside the control of SEM and this collateral should therefore be used as
a guide only. The products referred to in these publications are continually improved through further research and
development, which may lead to the alteration of information contained in this collateral. SEM does not accept any
responsibility whatsoever for misrepresentation by any person of the information contained in this collateral and
expressly disclaims any and all liability and responsibility to any person, whether a reader/viewer of this collateral or not,
with respect to claims, losses, damage, or any other matter, either direct or consequential, arising out of or in relation to
the use and reliance upon any information contained or products referred to in this collateral. SEM does not warrant that
the equipment will work properly in all environments and applications, and makes no warranty or representation, either
implied or expressed, with respect to the performance, throughput, or maintenance requirements of the machine.
Performance, throughput, and maintenance requirements vary depending on screen size, feed rate, and media type as
well as operational procedures. Information in this collateral is subject to change without notice and does not represent
a commitment on the part of SEM. SEM assumes no responsibility for any inaccuracies that may be contained in this
collateral or any omissions that may have occurred. SEM makes no commitment to update or keep current the
information in this collateral and reserves the right to make improvements to this collateral and/or to the products
described therein at any time without notice.
Proprietary Information: This document contains proprietary and confidential information of SEM, and shall not be used,
disclosed or reproduced, in whole or in part, for any purpose, without the prior written consent of SEM. Title in and to
this document and all information contained herein remains at all times in SEM. This information is exempted from
disclosure under FOIA, as amended.
To Next Page
Loading...
