25
508.366.1488 | www.semshred.com
Tools and PPE Required:
• Cut resistant gloves
• 7/16”, 1/2” wrench or socket wrench
• 5/16” Allen drive socket bit
• 4-6” socket wrench extension
• Torque wrench compatible with sockets listed above
• .005” Feeler gauge
Spare Knives and Sharpening: To avoid downtime, it is best to have a spare set of sharp knives on hand at all
times. SEM offers spare knives and sharpening services. Contact SEM Customer Service for details.
Screen: It is recommended, but not required, to remove the screen from the chamber while changing the knives.
Figure 2 – Section View of Chamber
To Next Page
Loading...
