Semtech SX1280 - Check and Upload the Firmware File

Wireless & Sensing Products
Development Kit User Guide Rev.1.0
UG.DEV.SX1280-1.W.APP February 2017
6 of 15
Semtech
Check and Upload the Firmware File 2.4.
Before using the SX1280 Development Kit, make sure to have the latest firmware:
- Go to the
Utilities section on page 14.
- Check the
Firmware Version.
- If it is not the latest version, download the firmware from the website
www.semtech.com and save it to your PC.
The firmware can then be uploaded to the SX1280 Development Kit.
To upload the firmware file:
- Connect the SX1280 Development Kit as explained in Section 2
- Allow your computer to display the kit as an extra device
- Drag and drop the .bin file that has been provided to you or that you have downloaded from the Semtech
website.
- The kit will initialize and eventually ask you to calibrate the screen, simply follow the on-screen instructions.