Sena 5R Lite - Advanced Noise Control (Always On)

5R LITE Motorcycle Bluetooth
®
Communication System | 37
10 CONFIGURATION SETTING
10.2.6 Background Volume (Default: Level 5)
The Background Volume can be adjustable only when the Audio
Multitasking turns on. Level 9 is the highest volume and 0 is the lowest.
10.2.7 HD Intercom (Default: Enable)
HD Intercom enhances the two-way intercom audio from normal quality
to HD quality. If this feature is disabled, the two-way intercom audio will
change to normal quality.
Note:
• The intercom distance of HD Intercom is relatively shorter than
that of normal intercom.
• HD Intercom will become disabled temporarily when Audio
Multitasking is enabled.
10.2.8 HD Voice (Default: Enable)
HD Voice allows you to communicate in high-definition during phone
calls. This feature increases the quality so that the audio will be crisp
and clear during phone call conversations.
If this feature is enabled, incoming phone calls will interrupt intercom
conversations and audio from the SR10 will not be heard during
intercom conversations.
Note:
• Refer to the manufacturer of your Bluetooth device that will be
connected to the headset to see if it supports HD Voice.
• HD Voice is active only when Audio Multitasking is disabled.
10.2.9 Voice Prompt (Default: Enable)
You can disable Voice Prompts by software configuration settings, but
the following voice prompts are always on.
- Headset configuration settings menu, battery level indicator, speed dial
10.2.10 Advanced Noise Control™ (Always On)
The background noise is reduced during an intercom conversation.