Sena 5R Lite - Installing the Headset on Your Helmet; Using the Clamp for Headset Main Unit

5R LITE Motorcycle Bluetooth
®
Communication System | 8
2. INSTALLING THE HEADSET
ON YOUR HELMET
To install the headset to the helmet, follow the steps below:
2.1 Preparing the Helmet for Installation
Detach the snap fasteners located on the internal paddings. Then,
remove the pads from the helmet.
2.2 Using the Clamp for Headset Main Unit
1. Insert the headset main unit into the clamp using the two connecting
slots on the back.
2. Insert the back plate of the clamp unit between the internal padding
and external shell of the left side of the helmet.
CHAPTER