5R LITE Motorcycle Bluetooth
®
Communication System | 9
2 INSTALLING THE HEADSET ON YOUR HELMET
3. Align the arrows on the headset main unit’s port with the speakers
and boom microphone cable, and insert the speakers and boom
microphone cable into the headset main unit’s port.
2.3 Using the Glued Surface Mounting Adapter for
Headset Main Unit
1. Insert the headset main unit into the glued surface mounting adapter
using the two connecting slots on the back.
2. Clean the area on the left side of the helmet where you will attach
the glued surface mounting adapter with a moistened towel and dry
thoroughly.
3. Peel off the cover of adhesive tape of the glued surface mounting
adapter and attach it to the left side of your helmet.
To Next Page
Loading...
