Sena MESHPORT RED User Manual

10
GETTING STARTED
2.1.3 Sena Device Manager
The Sena Device Manager allows you to upgrade the
firmware from your PC or Apple computer. Download the
Sena Device Manager from senaindustrial.com.
2.2 Powering On and Off
To power on the MeshPort Red, press and hold the
Multi-functionButton for 1 second. The LED flashes blue.
To power off the MeshPort Red, press and hold the
Multi-functionButton for 1 second. The LED flashes red
once.
2.3 Charging
The MeshPort Red can be charged using many common
methods via the supplied USB power & data cable. The LED
turns red while the MeshPort Red is charging and turns
blue when it is fully charged. Depending upon the charging
method, the MeshPort Red will be fully charged in about 2
hours.
Note:
• Any 3rd party USB charger can be used with Sena
products if the charger is approved by either the FCC,
CE, IC or other locally approved agencies that Sena
accepts.
• The MeshPort Red is compatible with 5 V input USB-
charged devices only.

Sena MESHPORT RED Specifications

General

Brand	Sena
Model	MESHPORT RED
Category	Adapter
Language	English