Sena MESHPORT RED User Manual

19
USING THE MESHPORT RED
4.5 Mesh Intercom Repeater Mode
The MeshPort Red can be used as a Mesh Intercom
Repeater without Bluetooth pairing with a Smartphone or
Tablet PC.
1. Execute Factory Reset.
2. Turn on the MeshPort Red and triple-tap the Multi-
function Button during the initial Bluetooth pairing.
3. The MeshPort Red will operate in Mesh Intercom
Repeater Mode.
• In Mesh Intercom Repeater Mode, Mesh Intercom
will start automatically when the power is on.
Note:
• In Mesh Intercom Repeater Mode, only the following
features can be executed:
– Power on/off
– Factory Reset
• If you want to pair with the Smartphone or Tablet PC,
execute Factory Reset and proceed with Bluetooth
pairing, referring to section 4.2 on page 14.

Sena MESHPORT RED Specifications

General

Brand	Sena
Model	MESHPORT RED
Category	Adapter
Language	English