Sena MESHPORT RED User Manual

7
ABOUT THE MESHPORT RED
1.3 Installing the MeshPort Red
Install the MeshPort Red where the antenna is not blocked
by the human body as much as possible.
When the human body is blocking the antenna, the Mesh
Intercom signal strength will be weakened.
1.3.1 Using the Belt Clip Mount
1. Attach the belt clip mount to the
back of the unit along the guide
rail, as shown in the illustration,
until you hear a click.
2. Mount the assembled unit in a
convenient location, such as on
your belt, with the antenna
upwards.
3. Angle the antenna away from
you to prevent it from interfering
with your movement.

Sena MESHPORT RED Specifications

General

Brand	Sena
Model	MESHPORT RED
Category	Adapter
Language	English