Sena MESHPORT RED User Manual

20
5.1 Firmware Upgrade
The MeshPort Red supports firmware upgrades. You can
update the firmware using the Sena Device Manager.
Please visit Sena Industrial website at senaindustrial.com to
check the latest software downloads.
5.2 Fault Reset
When the MeshPort Red is not working properly or is in
faulty status for any reason, you may reset by pushing the
Pin-hole Reset Button at the back of the main unit.
5.3 Factory Reset
If you want to restore the MeshPort Red to factory default
settings, execute Factory Reset. Press and hold the
Multi-funtion Button for 11 seconds until the LED flashes
white, the MeshPort Red automatically restores the default
settings and turns off.
5. TROUBLESHOOTING

Sena MESHPORT RED Specifications

General

Brand	Sena
Model	MESHPORT RED
Category	Adapter
Language	English