16
USING THE MESHPORT RED
4.2.3 Bluetooth Pairing When the MeshPort Red is
Turned On
1. To enter Bluetooth Pairing, press and hold the Multi-
function Button for 5 seconds until the LED flashes red
and blue alternately when the MeshPort Red is turned
on.
2. Search for Bluetooth devices on your Smartphone or
Tablet PC and select the MeshPort Red from the list of
devices detected on the Smartphone or Tablet PC. They
will automatically connect to each other.
3. When the LED flashes green of the MeshPort Red, the
pairing is completed. When the pairing is completed,
Mesh Intercom will turn on automatically.
4.3 Starting Mesh Intercom
4. 3.1 Mesh Intercom On and Off
1. To start Mesh Intercom, tap the Multi-function Button.
The LED flashes green.
2. To terminate Mesh Intercom, tap the Multi-function
Button.
Note:
• When you turn on Mesh Intercom, the party calling
your Smartphone or Tablet PC paired with the
MeshPort Red is ready to join the Mesh Intercom
conversation.
• Turning on Mesh Intercom disables the speaker and
microphone of the paired Smartphone or Tablet PC.
To Next Page
Loading...
Need help?
General
