Sena R2 - Intercom Pairing Using Device Buttons

R2 Smart Road Cycling Helmet | 22
7 BLUETOOTH INTERCOM
6. Click the Confirm Button and check that your friend (B) is paired with
you (A) correctly.
7. Repeat steps 4-6 to pair with Intercom Friends (C) and (D).
Note: The Smart Intercom Pairing (SIP) is not compatible with Sena
products that use Bluetooth 3.0 or below.
7.1.2 Using the Button
YOU
B
A
1. Users (You, B) enter into Intercom Pairing.
5s
HOLD
Blinking
“ Intercom Pairing”
2. Tap the Center Button on either Bluetooth system.
1x
TAP
Turns blue
Confirms intercoms are paired
A
B
YOU
3. Repeat the step above to pair with other Bluetooth systems (C and
D).