Sena R2 User Manual

R2 Smart Road Cycling Helmet | 28
8. UNIVERSAL INTERCOM
Universal Intercom allows you to have intercom conversations with
users of non-Sena Bluetooth headsets. Non-Sena Bluetooth headset
can be connected to the Sena Bluetooth system if they support the
Bluetooth Hands-Free Profile (HFP). You can pair the Bluetooth system
with only one non-Sena headset at a time. The intercom distance
depends on the performance of the Bluetooth headset to which it’s
connected. When a non-Sena Bluetooth headset is paired with the
Bluetooth system while another Bluetooth device is paired via Second
Mobile Phone Pairing, it will be disconnected.
8.1 Universal Intercom Pairing
1.
=
15s
HOLD
“ Configuration menu”
2.
=
2x
TAP
“ Universal intercom
pairing”
3.
=
1x
TAP
Enter into Universal
Intercom Pairing mode.
4. Put the non-Sena Bluetooth headset in Hands-free Pairing Mode. The
Bluetooth system will automatically pair with a non-Sena Bluetooth
headset.
8.2 Two-Way Universal Intercom
You can initiate the Universal Intercom connection with non-Sena
Bluetooth headsets using the same intercom connection method as you
would between other Sena headsets.
A
YOU
Non-Sena
Headset
You may start/end a Two-Way Universal Intercom using the same way
as you do in a normal Two-Way Intercom. Please refer to Section 7.3:
“Two-Way Intercom”.
CHAPTER

Sena R2 Specifications

General

Certificates	CE, FCC, IC
Bluetooth Version	Bluetooth 4.1
Intercom Range	900 meters (open area)
Operating Temperature	-10°C to 55°C
Charging Temperature	0°C to 45°C
Profiles	HFP, HSP, A2DP, AVRCP