SC1
Intercom pairing
Phone pairing
Second mobile phone pairing
Phone selective pairing
Media selective pairing
Speed dial
Audio Boost
VOX phone
Noise control
Delete all pairings
Remote control pairing
Universal intercom pairing
Factory reset
Exit configuration
32
14.1 Intercom Pairing
To enter into intercom pairing mode, tap the (+) Button until you
hear a voice prompt, “Intercom pairing”. Then tap the (- )
Button to enter into intercom pairing mode. Once two headsets
are in intercom pairing mode, tap the (+) Button of any one of the
two headsets and soon the intercom connection will automatically
be established. The headset will exit from the configuration menu.
14.2 Mobile Phone Pairing
To go into mobile phone pairing mode, tap the (+) Button until you
hear the voice prompt, “Phone pairing”. Please refer to section
5.1, “Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo
Device” for details on mobile phone pairing. If you tap the (+)
Button, you can exit from the phone pairing mode.
To Next Page
Loading...
Need help?
General
