Sena Schuberth SC1 User Manual

SC1
14.11 Enabling/Disabling Voice Prompts
Voice Prompt
“Voice prompt”
Factory Default
Enable
Enable/Disable
Tap the (-) Button
You can disable voice prompts by configuration setting, but the
following voice prompts are always on.
–– Voice prompts for configuration setting menu
–– Voice prompts for battery level
indicator –– Voice prompts for speed dial
–– Voice prompts for FM radio functions
14.12 Enabling/Disabling RDS AF
Voice Prompt
“RDS AF setting”
Factory Default
Disable
Enable/Disable
Tap the (-) Button
RDS AF allows a receiver to re-tune to the second frequency location
when the first signal becomes too weak. With RDS AF enabled on the
receiver, a radio station with more than one frequency can be used.
36
14.13 Enabling/Disabling Advanced Noise Control™
Voice Prompt
“Noise control”
Factory Default
Enable
Enable/Disable
Tap the (-) Button
When Advanced Noise Control is enabled, the background noise
is reduced during an intercom conversation. When it is disabled,
the background noise is mixed with your voice during intercom.
Note:
If you use your SC1 with the Bluetooth Audio Pack for GoPro, you can enable
or disable this feature only during Normal Audio Recording Mode. This feature
is automatically disabled while in Ultra HD (UHD) Audio Mode.
14.14 Delete All Bluetooth Pairing Information
Voice Prompt
“Delete all pairings”
Factory Default
N/A
Execute
Tap the (-) Button
To delete all Bluetooth pairing information of the SC1, tap the (+)
Button until you hear a voice prompt, “Delete all pairings”, and
tap the (-) Button to confirm.

Sena Schuberth SC1 Specifications

General

Brand	Sena
Model	Schuberth SC1
Category	Headsets
Language	English