SC1
17 TROUBLESHOOTING
17.1 Intercom Failure
When you try to start an intercom conversation with an intercom
friend who is unavailable within range or already having a
conference intercom with other riders or a mobile phone call, you
will hear a low tone double beep signifying an intercom busy
signal. In this case, you have to try again later.
17.2 Intercom Reconnection
If your intercom friend goes out of range while having an intercom
conversation, you may hear static noise and eventually the
intercom will be disconnected. In this case, the SC1 automatically
tries to reconnect the intercom every 8 seconds and you will hear
high tone double beeps until the intercom is reestablished. If you
do not want to make a reconnection, press and hold the (-) Button
for 1 second to stop the attempt.
17.3 Factory Reset
If you want to restore the headset to factory default settings, use the
Factory Reset in the configuration menu. The headset
automatically restores the default settings and turns off. Please
refer to section 14.17, “Factory Reset” for more details.
40
To Next Page
Loading...
Need help?
General
