Sena Schuberth SC1 User Manual

SC1
14.15 Remote Control Pairing
Voice Prompt
“Remote control pairing”
Factory Default
N/A
Execute
Tap the (-) Button
To enter into Remote Control Pairing mode, tap the (+) Button
until you hear a voice prompt, “Remote control pairing”. Then
tap the (-) Button to enter into Remote Control Pairing mode. The
headset will automatically exit from the configuration menu.
14.16 Universal Intercom Pairing
Voice Prompt
“Universal intercom pairing”
Factory Default
N/A
Execute
Tap the (-) Button
To enter into Universal Intercom Pairing mode, tap the (+) Button until
you hear a voice prompt, “Universal intercom pairing”. Then tap
the (-) Button to enter into Universal Intercom Pairing mode. The
headset will automatically exit from the configuration menu.
14.17 Factory Reset
Voice Prompt
“Factory reset”
Factory Default
N/A
Execute
Tap the (-) Button
To restore factory default settings on the SC1, tap the (+) Button
until you hear a voice prompt, “Factory reset” , and tap the (-)
Button to confirm. The SC1 powers off with a voice prompt,
“Headset reset, goodbye”.
14.18 Exit Voice Configuration Menu
Voice Prompt
“Exit configuration”
Factory Default
N/A
Execute
Tap the (-) Button
To exit voice configuration menu and get back to stand-by mode,
tap the (+) Button until you hear a voice prompt, “Exit
configuration”, and tap the (-) Button to confirm.
English
37

Sena Schuberth SC1 Specifications

General

Brand	Sena
Model	Schuberth SC1
Category	Headsets
Language	English