Sena Schuberth SC1 - Assigning Speed Dial

SC1
14.3 Second Mobile Phone Pairing
Voice Prompt
“Second mobile phone
pairing”
Factory Default
N/A
To go into second mobile phone pairing mode, tap the (+) Button
until you hear the voice prompt, “Second mobile phone
pairing”. Please refer to section 5.2, “Second Mobile Phone
Pairing - Second Mobile Phone, GPS, and SR10” for details on
second mobile phone pairing. If you tap the (+) Button, you can
exit from the second mobile phone pairing mode.
14.4 Phone selective pairing
Voice Prompt
“Phone selective pairing”
Factory Default
N/A
To go into phone selective pairing mode, tap the (+) Button until
you hear the voice prompt, “Phone selective pairing”. Please
refer to section 5.3.2, “HFP for Phone Call Only” for details on
phone selective pairing. If you tap the (+) Button, you can exit
from the phone selective pairing mode.
14.5 Media Selective Pairing
Voice Prompt
“Media selective pairing”
E
n
gl
is
h
Factory Default
N/A
To go into media selective pairing mode, tap the (+) Button until
you hear the voice prompt, “Media selective pairing”. Please
refer section 5.3.1, “A2DP Stereo Music Only” for details on
media selective pairing. If you tap the (+) Button, you can exit
from the media selective pairing mode.
14.6 Assigning Speed Dial
Voice Prompt
“Speed dial”
Factory Default
N/A
Execute
Tap the (-) Button
1. To assign a phone number as a speed dial, tap the (+) Button
until you hear a voice prompt, “Speed dial”.
2. Tap the (-) Button, and you will hear a voice prompt, “Speed
dial one” and “Phone connected”.
3. Tap the (+) Button to select one of three speed dial numbers
and you hear a voice prompt, “Speed dial (#)”.
33