Sena SF4 User Manual

SF Series
43
English
14.5 Media Selective Pairing
Voice Prompt
“Media selective pairing”
Factory Default N/A
To go into media selective pairing mode, tap the (+) Button or the (-)
Button until you hear the voice prompt, “Media selective pairing”.
Please refer section 5.3.1, “A2DP Stereo Music Only” for details on
media selective pairing. If you tap the (+) Button or the (-) Button, you
can exit from the media selective pairing mode.
14.6 Delete All Bluetooth Pairing Information
Voice Prompt
“Delete all pairings”
Factory Default N/A
Execute Tap the Center Button
To delete all Bluetooth pairing information of the SF Series, tap the (+)
Button or the (-) Button until you hear a voice prompt, “Delete all
pairings”, and tap the Center Button to conrm.
14.7 Remote Control Pairing
Voice Prompt
“Remote control pairing”
Factory Default N/A
Execute Tap the Center Button
To enter into remote control pairing mode, tap the (+) Button or the (-)
Button until you hear a voice prompt, “Remote control pairing”. Then
tap the Center Button to enter into remote control pairing mode. The
headset will automatically exit from the conguration menu.
14.8 Universal Intercom Pairing (SF2, SF4)
Voice Prompt
“Universal intercom pairing”
Factory Default N/A
Execute Tap the Center Button
To enter into universal intercom pairing mode, tap the (+) Button or the
(-) Button until you hear a voice prompt, “Universal intercom pairing”.
Then tap the Center Button to enter into universal intercom pairing
mode. The headset will automatically exit from the conguration menu.

Sena SF4 Specifications

General

FM radio	Yes
Sample rate	48 kHz
Maximum range	1200 m
Bluetooth version	4.1
Channels quantity	4 channels
Bluetooth profiles	A2DP, AVRCP, HFP, HSP
Preset stations quantity	10
Operating temperature (T-T)	-10 - 55 °C
Certification	CE, FCC, IC
Product color	Black, Grey
Charging time	1.5 h
Quantity	1
Cables included	AC, USB

Weight and Dimensions

Depth	16.6 mm
Width	73.3 mm
Height	38.7 mm
Weight	35 g