Sencor SLE 55F60TC

To Next Page

To Previous Page

22 EN

06/2016

2016

6.2.1. Picture mode

Press  /  button to select Picture Mode, then press OK button to enter sub-menu.

You can change the value of contrast, brightness, color, sharpness and tint when the

picture is in Personal mode.

Tip:

You can press PMODE button to change the Picture Mode directly.

Contrast/ Brightness/ Color/ Tint / Sharpness

Press  /  button to select option, then press  /  button to adjust.

Contrast Adjust the highlight intensity of the picture, but the shadow of the picture

is invariable.

Brightness Adjust the optical ﬁ ber output of the entire picture, it will affect the dark region

of the picture.

Color Adjust the saturation of the color based on your own like.

Tint Use in compensating color changed with the transmission in the NTSC code.

Sharpness Adjust the peaking in the detail of the picture.

Note:

Items are available only for Personal mode.

6.2.2. Color Temp

Change the overall color cast of the picture.

Press  /  button to select Color Temperature, then press OK button to enter sub-menu.

Press  / button to select. (Available Picture mode: Cool, Medium, Warm).

Sencor SLE 55F60TC - Page 24