EasyManua.ls Logo

Sencor SRV 1000SL - Page 4

Sencor SRV 1000SL
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN-4
EN
Robotic vacuum cleaner
SRV 1000SL
2019 01/2019
Do not place the power cord of the power adapter over sharp
objects. Make sure that the power cord does not hang over
the edge of atable and that it is not touching aheated surface.
It is forbidden to use apower adapter with adamaged plug or
power cord. For areplacement power adapter, please contact
an authorised service centre.
Never use the power adapter supplied with this appliance for
any other purposes.
Keep the power adapter and its power cord dry.
If the power cord of the power adapter is damaged, it must
be replaced by the manufacturer, its service technician or by
asimilarly qualified person, as this will prevent adangerous
situation from arising.
Do not connect and disconnect the power adapter cord to and
from the power socket with wet hands.
Do not uncover the electronic parts of the robotic vacuum
cleaner or its battery. They do not contain any components
repairable by the user. Have the appliance serviced by qualified
persons.
To charge the battery only use the power adapter supplied with
this robotic vacuum cleaner.
Make sure the power cord of the adapter is not touching ahot
surface.
To avoid any injury by electrical shock, do not spray the robotic
vacuum cleaner with water and do not submerge it in water
or any other liquid.
If you will not be using the robotic vacuum cleaner for an
extended period of time, take out the battery. Prior to taking
out the battery ensure that the robotic vacuum cleaner is
disconnected from the power socket and that it is turned off

Related product manuals