Sencor SRV 1000SL - Safety During Use

Robotic vacuum cleaner
SRV 1000SL
EN
EN-5
2019 01/2019
using the power button.
■ Do not use the robotic vacuum cleaner when it is not working
correctly, if it has been damaged or has been submerged in
water.
■ To avoid the danger of injury by electrical shock, do not repair
the robotic vacuum cleaner yourself or make any adjustments
to it. Have all repairs performed at an authorised service centre.
Tampering with the robotic vacuum cleaner during the warranty
period may void the warranty.
■ Prior to cleaning or maintenance, always disconnect the robotic
vacuum cleaner from the power socket and turn it off using
the power button.
SAFETY DURING USE
■ This robotic vacuum cleaner is designed for use in households,
offices and similar types of areas. Do not use it in rooms with
high humidity, e.g. in laundries or bathrooms, in industrial
environments or outdoors.
■ The robotic vacuum cleaner is not designed for vacuuming
water.
■ Do not expose the robotic vacuum cleaner to direct sunlight
and do not place it near an open fire or appliances that are
asource of heat.
■ Only use the robotic vacuum cleaner with the original
accessories from the manufacturer.
■ Ensure that the robotic vacuum cleaner has adust filter correctly
installed in the dust container before use.
■ Before putting the robotic vacuum cleaner into operation, check
that the entry door into your apartment or house is closed.
From the floor surfaces, remove clothing, paper, toys, power