ETHERNET PORT
The factory configuration of the Ethernet port is:
STATIC IP: 192.168.90.101
SUBNET MASK: 255.255.255.0
GATEWAY: 192.168.90.1
Multiple devices must not be inserted on the same network with the same static IP.
ATTENTION!
DO NOT CONNECT 2 OR MORE FACTORY-CONFIGURED DEVICES ON THE SAME ETHERNET
NETWORK, OR THE DEVICE WILL NOT WORK (192.168.90.101 IP ADDRESS CONFLICT)
FIRMWARE UPDATE
In order to improve, add or optimize the functions of the product, Seneca releases firmware updates on the
device section on the www.seneca.it website
The firmware update is performed using Seneca tools or the webserver.
ATTENTION!
NOT TO DAMAGE THE DEVICE DO NOT REMOVE THE POWER SUPPLY DURING THE FIRMWARE
UPDATE OPERATION.
To Next Page
Loading...
