EW-D EM rack receiver
36
Connecting/disconnecting the receiver to/
from the power supply system
Only use the supplied power supply unit. It is designed for your
receiver and ensures safe operation.
You will f i nd t he po wer suppl y unit and t he countr y adapt-
ers in the packaging under the tray:
To connect the receiver to the power supply system:
▷ Insert the plug of the power supply unit into the DC in sock-
et on the receiver.
▷ Pass the cable of the power supply unit through the strain
relief.
▷ Slide the supplied country adapter onto the power supply
unit.
▷ Plug the power supply unit into the wall socket.
To completely disconnect the receiver from the power supply
system:
▷ Unplug the power supply unit from the wall socket.
▷ Unplug the power supply unit from the DC in socket on the
receiver.
To Next Page
Loading...
