Using the Flex 5000
Flex 5000 | 21
Adjusting the volume
왘 Press the volume button + or the volume button – until the
volume is adjusted to a comfortable level. When the minimum or
maximum volume is reached, you hear a beep via the receiver.
WARNING
Danger of hearing damage due to high volumes!
왘 Before putting the receiver and the connected headphones on,
set the volume on the receiver to a low level.
왘 Do not expose yourself to high volume levels for extended peri-
ods of time.
Vol +
Vol -
If you have set a very high volume level and switch the
receiver off and on again, the volume is reset to a moderate
level to protect your hearing.
To Next Page
Loading...
