Sennheiser flex 5000 - Putting the Flex 5000 into Operation; Transmitter Setup and Placement

Putting the Flex 5000 into operation
10 | Flex 5000
Putting the Flex 5000 into operation
Setting up the transmitter
왘 Choose a suitable place near your sound source.
왘 Separate the transmitter from other wireless devices in the room
by at least 50 cm/20" to avoid interference.
왘 Do not place the transmitter close to metal objects such as shelf
bars, reinforced concrete walls, etc. as this can decrease the
transmitter’s range.