EasyManua.ls Logo

Sennheiser flex 5000 - Lithium Polymer Battery Safety

Sennheiser flex 5000
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Important safety instructions
4 | Flex 5000
Always ensure that the power supply unit is
in a safe operating condition and easily accessible,
properly plugged into the wall socket,
only operated within the permissible temperature range,
not exposed to
direct sunlight for longer periods of time in
order to prevent heat accumulation.
Varnish or furniture polish may degrade the feet of the transmit-
ter, which could stain your furniture. You should therefore place
the transmitter on a non-slip pad to avoid potential staining of
furniture.
Do not operate the product near heat sources.
Clean the product only with a soft, dry cloth.
Use only attachments/accessories/spare parts supplied or rec-
ommended by Sennheiser.
Safety instructions for lithium polymer recharge-
able batteries
WARNING
If abused or misused, the standard/rechargeable batteries may
leak. In extreme cases, they may even present a risk of
•explosion,
fire development,
heat generation,
smoke or gas developme
nt.
Switch rechargeable battery-powered products off after
use.
Do not charge a product with a built-in rechargeable
battery if the product is obviously defective.
Only use rechargeable batteries and chargers
recommended by Sennheiser.
Only charge rechargeable batteries at ambient
temperatures between 5 to 40 °C/41 to 104 °F.
When not using rechargeable batteries for extended
periods of time, charge them regularly (about every three
months).
Do not heat above 70 °C/158 °F, e.g. do not expose to
sunlight or throw into a fire.
Dispose of batteries/rechargeable batteries at special
collection points or return them to your specialist dealer.

Other manuals for Sennheiser flex 5000

Related product manuals