Sensaphone 800 - Page 100

Chapter 7: Operation
99
Call Delay:
Expired
Intercall Time:
Activated
Voice Repetitions:
Activated
Call Progress:
Activated
Max Calls:
Activated
Alarm Messages:
By Telephone
and
On site
,,,'LDORXW%HJLQV   9DULDEOH)DFWRUV
s4HEDIALOUTPROCESSISACTIVATEDASSOON
ASTHE#ALL$ELAYTIMEEXPIRESIFTHE
alarm has not been cancelled at the Model
SINSTALLATIONSITE4HEDIALOUTBEGINS
with telephone number 1 and proceeds
sequentially, through the remaining
telephone numbers.
s )FTHEALARMISNOTACKNOWLEDGEDWITHTHE
FIRSTDIALOUTTELEPHONECALLTHE-ODEL
WAITSTHEDURATIONOF)NTERCALL4IME
BEFOREDIALINGTHENEXTTELEPHONENUMBER
)NTERCALL4IMEISTHEPROGRAMMEDWAITING
PERIODINBETWEENEACHDIALOUTTELEPHONE
call.
s 7HENTHETELEPHONEISANSWEREDTHE
PROGRAMMED6OICE2EPETITIONSDETERMINE
the number of times per call the Model
800 recites the alarm message.
s #ALL0ROGRESSANAUTOMATICFEATURE
enables the Model 800 to detect whether
or not the telephone call is answered. After
10 rings, or if a busy signal is encountered,
the Model 800 will hang up, wait the
PROGRAMMED)NTERCALL4IMEANDPROCEED
TODIALTHENEXTTELEPHONENUMBER
s )FNOTELEPHONECALLSAREANSWEREDTHE
Model 800 dials out sequentially, through
the remaining telephone numbers and
continues to cycle until the programmed
-AXIMUM.UMBEROF#ALLSISREACHED
s 7HENTHETELEPHONEISANSWEREDTHE
Model 800 will immediately begin reciting
a message that indicates which of the
zones is in alarm. At the same time, the
alarm message is repeating at the Model
SINSTALLATIONSITE4HE-ODELWILL
request acknowledgment, if it has not yet
occurred.