Sensaphone 800 - Page 101

Sensaphone
®
Model 800 User’s Manual
100
Local, On-site
Acknowledgment
Touch-Tone
Acknowledgment:
Fast Code 555
Touch-Tone
Acknowledgment:
Normal Code 555
Tone or Pulse
Callback
Acknowledgment:
Within Intercall
Time
,97KH$ODUP,V$FNQRZOHGJHG   9DULDEOH)DFWRUV
s !TANYTIMEAFTERAVALIDALARM
is determined, the alarm may be
acknowledged at the Model 800’s
INSTALLATIONSITEBYPRESSING!,!2-
#!.#%,KEY
s 7HENTHE-ODELDIALSOUTAND
THECALLISANSWEREDVIA4OUCH4ONE
telephone, any alarm may be instantly
acknowledged by pressing “555.”
s )FTHEALARMMESSAGEREPEATSFOR
the number of programmed Voice
2EPETITIONSANDhvHASNOTBEEN
entered, the Model 800 will say:
“Enter acknowledgement code.”
 4HE-ODELWAITSSECONDSFORTHE
4OUCH4ONECODEhvTOBEENTERED)F
the code is entered within 10 seconds, it
responds:
“Alarm acknowledged.”
 4HEALARMISCONSIDEREDACKNOWLEDGED
and the dialout concludes.
s )FTHE-ODELDOESNOTRECEIVETHE
4OUCH4ONECODEWITHINSECONDSIT
recites the following:
“Error, enter acknowledgement code.”
If the Model 800 does not receive the
acknowledgement code a second time,
it says “error, goodbye” and hangs up.
4HERECIPIENTOFTHISMESSAGEMUSTCALL
the Model 800 back within the period
PROGRAMMEDFOR)NTERCALL4IMEINORDER
to acknowledge the alarm. If Local
Voice Mute is off, the unit will beep at
the installation site while waiting for this
call.
s#ALLBACK!CKNOWLEDGEMENT)FENABLED
the Model 800 waits 10 rings before