Sensaphone 800 - Page 91

Sensaphone
®
Model 800 User’s Manual
90
0RESS34!453
STATUS
3ECTIONSANDDEMONSTRATETWODIFFERENT3TATUS
2EPORTRECITATIONS4HE3TATUS2EPORTSTARTSWITH
“Hello. This is 555-1234 (or the programmed ID), (Custom ID
Message).”
“It is now 12:15
PM (or the current time).”
4HE-ODELPROCEEDSWITHASEPARATEREPORTFOREACHZONE
Each zone identifies itself by reciting the zone number and it’s
associated voice message.
([DPSOH6WDWXV5HSRUW1R$ODUPV
:ONESANDARECONFIGUREDASDRYCONTACTAND
ZONEISCONFIGUREDASTEMPERATURE.OALARMSEXIST4HE3TATUS
2EPORTBEGINSBYSAYING “Hello, this is 555-1234, this is building
M, third floor; it is now 2:30
PM.”
&OLLOWINGTHISINTRODUCTIONTHEREPORTCONTINUES
“Zone 1, room temperature, 74 degrees, OK.”
“Zone 2, door alarm, OK.”
“Zone 3, ups alarm, OK.”
“Zone 4, water sensor, OK.”
“Zone 5, OK.”
“Zone 6, OK.”
“Zone 7, OK.”
“Zone 8, OK.”
“The sound is OK.”
“The power is ON.”4HISREFERSTO!#POWER
“The batteries are OK.” Other possible responses: “Batteries
are low” or “Replace batteries.”2EFERTO3ECTIONFOR
ADDITIONALINFORMATIONREGARDINGBATTERYCONDITION
“The output is off.”