Need help?Do you have a question about the SENTRY II 940ST Series and is the answer not in the manual?
General| Product Type | Water Dispenser |
|---|---|
| Model | SENTRY II 940ST Series |
| Cooling System | Compressor |
| Material | Stainless Steel |
| Certification | UL |
Details water pressure, temperature, and electrical requirements for the system.
Provides critical safety and operational warnings for the water softening system.
Checklist of requirements and initial physical setup for the water softener.
Detailed steps for making water line connections, including preparations.
Guidelines for connecting the drain, overflow, and brine lines.
Instructions for connecting the power and initial system checks.
Step-by-step guide to set the current time on the control valve.
Instructions for programming the desired time for the regeneration cycle to begin.
Guide on how to set the number of days between regeneration cycles.
Components of the front cover, drive assembly, and circuit board.
Internal parts of the main valve body, pistons, and injector housing.
Components related to brine lines, drain lines, and flow control assemblies.
Parts for the bypass assembly and the brine tank.
Various fitting assemblies used for connecting the system.
Tables detailing mineral and brine tank sizes, capacities, and related components.
Specifications for the control valve, including injector size and flow rates.
Procedures for disassembling, inspecting, and reassembling the drive assembly and cap.
Steps for servicing main piston, brine piston, and seal/spacer stack assemblies.
Guides for cleaning, inspecting, and reassembling injectors and flow controls.
Addresses problems with the control valve display not showing, incorrect time, or flashing time.
Covers issues where the control valve fails to regenerate automatically or manually.
Deals with untreated water, excess salt usage, and salt in service lines.
Addresses excessive brine tank water, failure to draw brine, and water running to drain.
Explains issues related to motor movement errors (Err 1001-1004) and their causes.
To Next Page
