Server Technology switched pro2 - Page 132

Switched PRO2 – User Guide
Using the Command Line Interface (CLI) • 132
Displaying the Submenus
To view submenus of valid options for a command, type the main command and press Enter:
Example:
Switched CDU: set
'set' menu options:
access banner bluetooth branch config cord dhcp dns email
energywise feature ftp http https ipv4 ipv6 ldap ldapgroup line
loadshed location net ocp outlet phase port radius sensor snmp
sntp spm ssh syslog tacacs tacpriv telnet unit ups user
Example::
Switched CDU: show
'show' menu options:
access bluetooth branches config cords email energywise features
ftp ldap lines loadshed log network ocps outlets phases ports
radius sensors shutdown snmp sntp syslog system tacacs units ups
Command Syntax Notes
The following conventions apply to the command syntax shown in the Command Details section:
[argument] mandatory argument that is not prompted for.
[argument] optional argument that is not prompted for.
<argument> argument that will be prompted for if not specified on the command line.
{argument} argument that can only be prompted for.
Example (set access command):
set access
Sets user access configurations.
Command Syntax
set access button [disabled | enabled]
set access clitimeout <value>
set access localadmin [required | optional]
set access logorder [newest | oldest]
set access method [localonly | ldaponly | ldaplocal | radiusonly | radiuslocal |
tacacsonly | tacacslocal]
set access prompt <prompt string>
set access strongpw [optional | required]
set access webloglen <value>
set access webtimeout <value>