Switched PRO2 – User Guide
Introducing the PRO2 • 6
What’s the PRO1?
Like the PRO2, the PRO1 (Switched and Smart) is another new PDU design from Server Technology to provide the
same type of flexibility for power management, cost savings, and advanced data center solutions that the PRO2
delivers.
What’s Unique About the PRO1?
Server Technology’s PRO1 design allows for PRO2 functionality in a CDU1 form factor.
The PRO1 uses the Sentry4-MIB and the PRO2 firmware, version 8.0.x, allowing PRO1 products to offer the latest
features and functions of the PRO2 product family.
Equipment View of the PRO1 Unit
Feature Comparison: PRO1 vs. PRO2
The PRO1 is similar to the PRO2 in hardware architecture, object mapping, user interfaces (GUI and CLI), firmware
(version 8.0.x or later), and new Sentry4-MIB, but the PRO1 does not include the following PRO2 items:
• Branch Current Monitoring feature
• TRMS Current Input Monitoring (in some cases rather than PIPS)
The following table shows a detailed benefit comparison:
CDU with the NIM2/PRO2 network card:
• Faster processor and more memory
• Hot swap network card
• Network card swap with no re-programming (PCM)
• Features/functions can be added as needed
• Multi-linking (up to 4 units)
• Power from link unit keeps network up if power from master unit goes down
• Sentry4-MIB allows additional alarm warning and threshold levels
PRO2 architecture with the NIM2 network card:
• PRO1 features, plus additional features
• PIPS standard
• Branch monitoring standard
• Locking data and low voltage cables
• Smart products with breaker/fuse branch circuit sensing
• All products 60 degrees Celsius rated
To Next Page
Loading...