Server Technology switched pro2 - Page 151

Switched PRO2 – User Guide
Using the Command Line Interface (CLI) • 151
remove user
Removes a local user from the system.
Command Syntax
remove ups <name>
Command Access
Admin level only
restart
Restarts the system.
Command Syntax
restart [factkeepnet | factory | ftpload | newx509cert | newsshkeys | normal]
Parameters
The restart command uses the following parameters.
Note: None of the parameters in the following table performs a normal system restart.
factkeepnet
Removes all system configurations except network configuration.
factory
Removes all system configurations.
ftpload
Performs a system update through an FTP load.
newx509cert
Creates a new self-signed SSL X509 certificate.
newsshkeys
Creates a new set of public and private SSH keys.
normal
Performs a normal system restart.
Command Access
Admin level only; no access in Demo mode
senstat
Displays the latest status and metrics for all sensors in the system.
Command Syntax
senstat
Command Access
System monitor access