Switched PRO2 – User Guide
Using the Command Line Interface (CLI) • 190
show ocps
Shows over-current protection (OCP) configuration values.
Command Syntax
show ocps
Command Access
Admin level only
Example
Switched CDU: show ocps
SNMP Email User / Factory
ID Over-Current Protector Name Notif. Notif. Current Capacity
-- --------------------------- ------ ------ ----------------
AA1 AA:Breaker_1 enabled enabled 20A / 20A
AA2 AA:Breaker_2 enabled enabled 20A / 20A
AA3 AA:Breaker_3 enabled enabled 20A / 20A
To Next Page
Loading...