Server Technology switched pro2 - Page 202

Switched PRO2 – User Guide
Using the Command Line Interface (CLI) • 202
sysstat
Displays the count of all system objects (by type), the latest status of the objects, and the
count of objects currently in an event condition.
Command Syntax
sysstat
Command Access
System Monitor access
Example
Switched CDU: sysstat
Qty Sub-System Status Events
--- ---------- ------ ------
2 Units Normal 0
1 Cords Normal 0
3 Lines Normal 0
3 Phases Normal 0
3 OCPs Normal 0
3 Branches Normal 0
30 Outlets Normal 0
14 Sensors Normal 0
1 UPS Normal 0
upsstat
Displays the latest status and metrics for all UPS devices in the system.
Command Syntax
upsstat
Command Access
System Monitor access
Example
Switched CDU: upsstat
ID UPS Type Status
-- -------- ------
1 Generic RFC1628 Not Found