54 Operations Switched PDU
Installation and Operations Manual
Administrative Command Summary
Create User Adds a user account
Delete Groupfromuser Removes access to one or more groups for a user
Delete Outletfromgroup Deletes an outlet from a group name
Delete Outletfromuser Removes access to one or all outlets for a user
Delete Portfromuser Removes access to one or all serial/Pass-Thru ports
List User Displays all accessible outlets/groups/ports for a user
List Users Displays privilege levels for all users
Remove Group Deletes a group name
Remove UPS Deletes a UPS association
Remove User Deletes a user account
Restart Performs a warm boot
Set Banner Set the pre-login banner text
Set Bluetooth Discover Determines the current status of the pushbutton on the Bluetooth module
Set Bluetooth Name Configures the name of the discovered Bluetooth module on the Android device
Set Bluetooth Pincode Pin code value for legacy Bluetooth modules that require a pin to pair the module
Set Bluetooth Transpwr Designated transmission power (dbm) for the Bluetooth module.
Set DHCP Enables or disables DHCP support
Set DHCP Boot Delay Enables or disables a 100-second boot delay between PDU and DHCP server
Set DHCP Static Address Fallback Enables or disables DHCP fallback to a static IP address
Set DNS Sets the IP address of the Domain Name server
Set EnergyWise Enables or disables the Cisco EnergyWise network
Set EnergyWise Domain Sets the Cisco EnergyWise domain name
Set EnergyWise Port Sets the Cisco EnergyWise port number
Set EnergyWise Refresh Rate (in seconds) at which information is pushed to the EnergyWise manager
Set EnergyWise Secret Sets the Cisco EnergyWise secret
Set Envmon Name Specifies a descriptive field fro the integrated Environmental Monitor
Set Envmon THS Name Specifies a descriptive field for a temperature-humidity sensor
Set FTP Autoupdate Day Sets the automatic FTP update day
Set FTP Autoupdate Hour Sets the automatic FTP update hour
Set FTP Autoupdate Enables or disables automatic FTP update support
Set FTP Directory Specifies the directory for the file to be uploaded
Set FTP Filename Specifies the file to be uploaded via FTP
Set FTP Host Sets the FTP Host IP address or hostname
Set FTP Password Sets the password for the FTP Host
Set FTP Test Validates that the PDU can login to the FTP server and verify/download the firmware file
Set FTP Server Enables or disables the FTP server
Set FTP Username Sets the username for the FTP Host
Set Gateway Sets the gateway of the PDU
Set HTTP Enables or disables HTTP access and sets the HTTP target port.
Set HTTP Port Specifies the target port for HTTP access
Set Infeed Loadmax Specifies the maximum load capacity for the infeed
Set Infeed Name Specifies a descriptive field for the infeed
Set Infeed Voltage Specifies the nominal input voltage for the infeed
Set IP Address Sets the IP address of the PDU
Set LDAP UseTLS Enables or disables LDAP over TLS/SSL support
To Next Page
Loading...