Various cycles and functions
19
Various cycles
M-Smart wash cycle
M-Smart wash cycle can intelligently detect the
weight of laundry and match different washing time
and temperature to realize intelligent washing.
" " is displayed in the detection stage after
the cycle is started, and the M-Smart wash cycle can
be entered by the following three methods.
When the appliance is OFF, press and hold the
ONE-TOUCH button for at least 3 seconds, the
appliance will run the M-Smart wash cycle directly,
with the M - Smart indicator light
lit.
When the appliance is ON, press and hold ONE-
TOUCH button for at least 3 seconds, the
appliance will run the M-Smart wash cycle directly,
with the M - Smart indicator light
lit.
When the appliance is ON, short press the ONE-
TOUCH button, the M-Smart indicator light
Is lit, and then press the START/PAUSE
button, the appliance runs the M-Smart wash
cycle.
Drying program
How to set the drying program?
1、To set the program of " Washing + Drying "
Only part of the washing program can add drying
function.
First, load the laundry into the drum, close the door,
turn the Wash cycle Selector knob to select the
desired wash program (except for the Drying
program), and press the Dry button to select the two
drying modes as follows:
-----Automatic drying: Press the Drying button
continuously to adjust the drying time that is
displayed on the panel, and when “ ” is
displayed, the automatic drying mode is activated,
the drying time can be automatically adjusted
according to the amount and humidity of clothes.
-----Timed drying: Press the Dry button to set the
drying time. Press the Drying button, the digital
display screen will display the timing drying time (30-
60-90-120-150-180-210-240),
select an appropriate the timing drying time and
enter the timing drying mode. Then, press the
Start/Pause button, the machine starts running the
Washing + Drying program, with the drying program
automatically activated at the end of the washing
program.
2
、To set the Drying Only program
The Drying Only program is suitable for drying
clothes of cotton. Do not dry clothes that are prone
to deformation or shrinkage. When the Drying Only
program is set, before drying, it is recommended to
run a single spin cycle for the clothes to be dried.
● First, load the laundry in the drum, close the door,
turn Wash cycle Selector knob to select the Drying
program only, and then press the Drying button
continuously, so as to select the mode of Auto drying
or Time drying (as described above).
● Then, press the START/PAUS E button to start the
Drying Only program..
3. To set the down jacket drying program
"Washing+Drying" program should be used to dry
down jackets. Please select "Down Jacket” program
+"Automatic Drying ( )” mode". Please do
not choose Drying only mode for down jacket drying.
In order to achieve better drying effect, it is
recommended to dry single down jacket once.
Precautions for drying program
1. If there is too much moisture in the clothes, the
machine will automatically extend the drying time,
and it is normal to display " " for too long.
2. When the drying program is running, the faucet
must be turned on, because the water is required
for cooling and dehumidification during drying
program.
3. The longest drying time is set according to
different models.
4. In order to prevent the wrinkle of laundry caused
by excessive drying, the drying time can be set a
little less at first, and then the drying time can be
added according to the drying effect.
5. Before running the Drying Only program, it is
recommended to run a spinning cycle firstly.
6. If necessary, please untie the nodules of clothes
after spinning, and then put them into the drum
for drying.
7. For larger or thicker clothes, drying may be
uneven in some positions of clothes. Please add
drying time according to drying effect after
finishing drying cycle.
8. Wool fabrics are not suitable for drying.
9. Do not dry clothes that are liable to deformation
or shrinkage.
10. Some programs have no drying function.
To Next Page
Loading...
