Various cycles and functions
22
Cancelling the buzzer
Press and hold the SPEED button and ONE TOUCH
button together at the same time for at least 3
seconds, you can turn off the buzzer that sounds
during the washing cycle running.
To activate the buzzer setting
Do the same operation as you did for cancelling. The
buzzer setting is activated after one beep.
Load balancing system
The appliance has an automatic detection system for
eccentric load. In the process of spinning, if the
clothes are unevenly distributed, the appliance will
level and adjust the clothes until the clothes are
evenly distributed before spinning. If the clothes
cannot be evenly distributed within the specified
time, the appliance will not spin to avoid severe
vibration of the machine. At this time, you need to
check whether the clothes are knotted or entangled,
and select the "Spin" program after reorganizing the
clothes. When washing less clothes, such as a pair of
jeans, a sweater, a bath towel, etc., the machine may
not complete the spinning process due to balance
protection. Please wash the large and small clothes
together as much as possible to make the clothes
easier to release evenly and complete the spinning
process smoothly.
NOTICE:
Due to the different types and materials of the
laundry, the automatic adjustment and balance
system of the appliance may level and adjust the
clothes for many times to prolong the spinning time.
This is a normal phenomenon, not a machine failure.
Downlight
Downlight is always on during program or function
setting.
When the program is suspended, the downlight
can be lit by opening the machine door.
When the program is running, the downlight will
automatically light up with the change of washing
stage.
Touching any button other than the power button
can also illuminate the downlight.
To Next Page
Loading...
