23
STEP 5.
MODE
TARE
POWER
0.00
rA7E Y
To select the “x” units as a flow rate, press the MODE key and the balance will
return to the normal weighing mode.
STEP 6.
MODE
TARE
POWER
0.00
rA7E n
To disable the “x” units as a flow rate, press the TARE key to display “rATE n”
for rate no and then press the MODE key. The balance will return to the
normal weighing mode.
Note: Flow rate can be displayed in other weight units per second such as
ounces per second, grains per second, milligrams per second, etc.
Refer to the previous section SETTING THE USER DEFINED UNIT OF
MEASURE to convert the user defined unit to the weight unit of
choice, then follow the procedure above to enable flow rate.
To Next Page
Loading...
Need help?
General
