24
FIRMWARE VERSION
The operating software in your balance has a reference number. To display
this number, follow the procedure outlined below.
STEP 1.
TARE
POWER
MODE
FUnC
0.00
Hold down the TARE key then press the MODE key. Release both keys, the
display will read "FUnC".
STEP 2.
MODE
TARE
POWER
rEFFUnC
Press the TARE key repeatedly to display “rEF” for reference number.
Note: To escape anytime during this procedure, press the TARE key until
"ESCAPE" is displayed and press the MODE key.
STEP 3.
MODE
TARE
POWER
rEF2.00
rEf
Press the MODE key to display the software reference number, then press the
TARE key to return to the normal weighing mode.
To Next Page
Loading...
