Settop M1-15 - Turn on Settop M1; Configuring via Wi-Fi

14
Turn on Settop M1
When you received SETTOP M1 for the first time, it is necessary to set a minimum setting. You can follow
this setting Step by Step:
Configuring via Wi-Fi
● Step 1:
○ Connect Power Cable (PN. 310655-v3  ) in COM1
○ Connect Total Station cable (PN: 310605  ) in COM2
● Step 2:
Press the ON/OFF button and wait until the OS Boots Up. Wi-Fi LED flashes modulate (see diagram in
section 1.4 Settop M1 Scheme) when searching for a network and Wi-Fi LED flash 2 times per second
● Step 3:
With a PC, smartphone (Android), iPhone or iPad with Wi-Fi Access, press “search network”  . It will appear
as one network called “Settop M1 SN”  (SN is a serial number).
● Step 4:
Enter Network password “settopm1” (in lowercase).
● Step 5:
Open your Internet browser (it supports Google Chrome and Safari) and key in IP address 192.168.2.2
● Step 6:
○ User name is: admin
○ Password: The password defined for the first time that access to web (or m1)
Configuring via PHONE
● Step 1:
○ Connect Power Cable (PN. 310655-v3  ) in COM1
○ Connect Total Station cable (PN: 310605  ) in COM2
● Step 2:
Press the ON/OFF button and wait until the OS Boots Up. Phone LED flashes constantly (one or two times
per second) (see diagram in section 1.4 Settop M1 Scheme).
● Step 3:
With a PC, iPhone or iPad, open your Internet browser (it supports Google Chrome and Safari) and key in
static IP address assigned at SIM card.
● Step 4:
✔ User name is: admin
✔ Password: The password defined for the first time that access to web (or m1)
SETTOPSURVEY, S.L. Bofarull 14, 08027 Barcelona (Spain) Phone: (+34) 93 340 05 73 Fax: (+34) 93 351 95 18 www.settopsurvey.com info@settopsurvey.com