SEW-Eurodrive INTERBUS UFI11A - Page 22

5
22
Manual – Fieldbus Interface INTERBUS UFI11A
INTERBUS Interface
On-line configuration: Configuration frame / Read in
You can initially install the INTERBUS system completely and then set the DIP switches
of the UFI11A. The entire bus structure (configuration frame) can then be read in via the
CMD Tool. All stations will be automatically identified with their set data length.
ID Code 224 dez (E0 hex) Parameter channel PCP: 2 words
Process data
channel:
16 Bit 1 process data word (Param + 1 PD)
32 Bit 2 process data words (Param + 2 PD)
48 Bit 3 process data words (Param + 3 PD)
64 Bit 4 process data words (Param + 4 PD)
80 Bit 5 process data words (Param + 5 PD)
96 Bit 6 process data words (Param + 6 PD)
112 Bit 7 process data words (Param + 7 PD)
128 Bit 8 process data words (Param + 8 PD)
160 Bit 10 process data words (Param + 10 PD)
192 Bit 12 process data words (Param + 12 PD)
224 Bit 14 process data words (Param + 14 PD)
352 Bit 22 process data words (Param + 22 PD)
384 Bit 24 process data words (Param + 24 PD)
ID Code 225 dez (E1 hex) Parameter channel PCP: 4 words
Process data
channel:
16 Bit 1 process data word (Param + 1 PD)
32 Bit 2 process data words (Param + 2 PD)
48 Bit 3 process data words (Param + 3 PD)
64 Bit 4 process data words (Param + 4 PD)
80 Bit 5 process data words (Param + 5 PD)
96 Bit 6 process data words (Param + 6 PD)
128 Bit 8 process data words (Param + 8 PD)
160 Bit 10 process data words (Param + 10 PD)
192 Bit 12 process data words (Param + 12 PD)
320 Bit 20 process data words (Param + 20 PD)
352 Bit 22 process data words (Param + 22 PD)
Program setting Function