SEW-Eurodrive INTERBUS UFI11A - Page 25

Manual – Fieldbus Interface INTERBUS UFI11A
25
5
INTERBUS Interface
Parameter
channel
The following settings of the parameter channel will become necessary if you want to
use the PCP channel for configuring the UFI11A or a drive inverter connected to the
UFI11A:
• Message Lengths / Transmit / Receive: 243 bytes each
• Supported Parameter Channel Services (Standard): Read / Write
Assigning pro-
cess data
You assign the INTERBUS process data of the drive inverters to the program addresses
of the control system with the context menu "Process Data."
03717AXX
Fig. 14: Setting the parameter channel (PCP)
05657AXX
Fig. 15: Assignment of INTERBUS process data and PLC program addresses