SEW-Eurodrive MOVIMOT flexible MMF1 C/DSI Series User Manual

6
Startup
Startup procedure
Operating Instructions – MOVIMOT
®
flexible
173
PI configuration
• Advanced PE configuration
Drive functions
• FCB05 Speed control
• FCB06 Interpolated speed control
• FCB09 Positioning
• FCB10 Interpolated position control
• FCB12 Reference travel
Advanced
drive functions
• FCB01 Output stage inhibit
• FCB02 Stop default
• FCB20 Jog mode
• FCB21 Brake test
• FCB26 Stop at user limit
Event-driven functions
• Touchprobe 1
• Cam switch
Monitoring functions
• Reference signals
• Limit values 1
• Monitoring functions 1
• Energy-saving function
User units Converting system units into user units.
Information on the
drive unit
Device data is available via the project nodes.
Device data
• Device identification
• Main component
• Subcomponent
• Production label
Fault responses
Overview
• Axis module
• Power supply monitoring
• Functions
Setup
• Access rights
• Resetting device parameters.
29128668/EN – 12/2019

SEW-Eurodrive MOVIMOT flexible MMF1 C/DSI Series Specifications

General

Brand	SEW-Eurodrive
Model	MOVIMOT flexible MMF1 C/DSI Series
Category	DC Drives
Language	English