SEW-Eurodrive MOVIMOT flexible MMF1 C/DSI Series User Manual

3
Device structure
Example nameplate and type designation
Operating Instructions – MOVIMOT
®
flexible
20
C Version
C= generationC
/
BW1 Options
DSP = DynaStop
®
electrodynamic deceleration option
BES= Control module BES brake rectifier 24V
2)
IV= Plug connector
PE= pressure compensation fitting for electronics
BW1= integrated BG1 braking resistor
/
DSI10A Electronics cover design
DSI10A = Direct Systembus Installation – EtherCAT
®
/SBus
PLUS
(communication via M12)
–
0020 Nominal output current of the electronics cover
0020 = 2.0A
0025 = 2.5A
0032 = 3.2A
0040 = 4.0A
0055 = 5.5A
1) Only available in combination with MOVIMOT
®
flexible MMF3.
2) Not available in combination with the DSP option.
29128668/EN – 12/2019

SEW-Eurodrive MOVIMOT flexible MMF1 C/DSI Series Specifications

General

Brand	SEW-Eurodrive
Model	MOVIMOT flexible MMF1 C/DSI Series
Category	DC Drives
Language	English