SEW-Eurodrive MOVIMOT flexible MMF1 C/DSI Series User Manual

11
Technical data and dimension sheets
Technical data
Operating Instructions – MOVIMOT
®
flexible
371
General
MOVIMOT
®
flexible
flange size electronics cover
MMF.1..
Sizes of the electronics cover Size1
without cooling fins
Size1
with cooling fins
Type of electronics cover DFC...-
0020...
DFC...-
0025...
DFC...-
0032...
DFC...-
0040...
DFC...-
0055...
Nominal output current 2.0A 2.5A 3.2A 4.0A 5.5A
Power section
Nominal power loss
P
V
19W 24W 31W 40W 58W
Permitted number of times
power may be switched on/
off
1 × per minute
Minimum switch-off time for
Power off
10s
Duty type S1, DB according to EN60034‑1
Type of cooling Natural cooling to DIN41751 and EN61800-5-1
Signaling functions Display elements on the housing to indicate the device state
Required preventive meas-
ure
Grounding the device
Current carrying capacity of
terminals
See chapter "Current carrying capacity of the terminals". For more in-
formation, refer to chapter "Electrical installation" > "Installation in-
structions" > "Permitted cable cross section of terminals"
Interference immunity EN61800‑3; 2.Environment (industrial environment)
Interference emission EN61800-3 category C3
(with IT systems, no EMC category is specified)
Mass MMF1.= 3.5kg
MMF3.= 5.0kg
MMF1.= 4.0kg
MMF3.= 5.5kg
29128668/EN – 12/2019

SEW-Eurodrive MOVIMOT flexible MMF1 C/DSI Series Specifications

General

Brand	SEW-Eurodrive
Model	MOVIMOT flexible MMF1 C/DSI Series
Category	DC Drives
Language	English