Sewha SI 480E - Page 26

26
SI 480E DIN SIZE WEIGHING CONTROLER
2
Format 3. (recommended when connecting to PLC or PC)
3
CAS Format
Print Mode selection (Under F32-02 setting, only)
F38
●
0
Manual Print : Whenever “Print” key input.
1
Auto print (at the first Steady point over “EMPTY” range
or Whenever “Print” key input.)
2
Auto print (Whenever Steady status at over “EMPTY” range
or Whenever “Print” key input.)
■ Print Mode Setting
Weight Unit selection
F41
●
0
Kg
1
g
2
t
Print Format selection
F42
●
0
Continuous Print - Serial No. and Weight will be printed continuously.
1
Single Print - Date, Time, S/N, ID No. Weighing Data will be print
SUB/GRAND Total Data Delete selection
F44
●
0
Not deleted (= manual Delete mode)
1
Automatically Deleted.-After print out SBU/GRAND Total.
Paper Withdraw Rate setting (After SUB/GRAND Total Print)
F45
03
00~09
Whenever set value increased as 1, then 1 line will be added.
Paper Withdraw Rate setting (After Continuous/Single Print)
F46
03
00~09
Whenever set value increased as 1, then will be added.
Printing Language Selection
F47
●
0
KOREAN
1
ENGLISH
Minus(-) symbol Print selection
F49
●
0
Print minus(-) symbol, if the weight is minus(-).
1
Ignore minus(-) symbol
Set time of “Average Hold”
F50
03
00~09
When setting “Average Hold”, set the time. (unit : sec)
※Automatic Hold Rest , After set time.